Place by Path
The workflow for placing auxiliaries by path is as
follows:
- User must go to Home>Auxiliaries>Place By Path.
- Place Auxiliaries By Path
command window will appear.
- User selects an
external cell.
- User specifies active angles i.e. the rotation angle about global X,Y,Z axis and X,Y,Z scales.
- User specifies a
frequency mode and gives inputs. There are three frequency modes to place
external cells.
- User specifies a horizontal offset and a vertical offset that are used to place cells with an offset from alignment.
- User specifies a material.
- User selects an
external cell.
- User locates tunnel.
- Auxiliary Selection dialog will be opened.
- User specifies Start Station and End Station on command window or graphically.